No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5975-00-580-0434
NSN 6150-01-382-7232
NSN 5999-01-078-0507
NSN 5965-00-113-9748
NSN 5965-00-285-0745
NSN 5905-01-145-4143
NSN 6240-01-556-5310
NSN 5996-01-162-6613
NSN 5965-01-514-7231
NSN 5960-00-984-6413
NSN 5975-00-525-2331
NSN 6320-00-139-1090