Second end has a hole 0.281 in. Diameter and a groove 0.735 in. Dia, 0.125 in. Wide
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5855-01-651-3794
NSN 5990-00-771-8792
NSN 5915-01-070-2816
NSN 6650-00-169-1537
NSN 7035-00-727-4068
NSN 4140-01-441-2339
NSN 7035-00-421-8710
NSN 5915-01-111-9971
NSN 5920-01-512-9393
NSN 5925-01-367-6118
NSN 5996-00-518-4880
NSN 5895-01-135-1852