Material is stainless steel
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 2925-01-327-3069
NSN 5905-01-025-2035
NSN 5999-00-718-6276
NSN 6620-00-643-1402
NSN 6135-01-093-7426
NSN 6240-00-726-4547
NSN 7035-00-064-7008
NSN 6220-01-177-4695
NSN 6610-00-248-1559
NSN 5998-00-445-2346
NSN 5975-01-252-3611
NSN 6320-01-578-6006