A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6145-01-522-4029
NSN 6150-00-081-9928
NSN 5975-01-653-9764
NSN 5930-00-985-0990
NSN 5998-01-509-0150
NSN 5945-01-315-9553
NSN 7035-01-398-3494
NSN 5950-01-131-2376
NSN 6610-00-553-5103
NSN 5999-01-564-8892
NSN 6620-00-335-9462
NSN 5975-01-113-6375