Subassembly is the magneto
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5960-00-086-0576
NSN 5895-01-235-8063
NSN 5999-01-050-7854
NSN 6320-00-228-5678
NSN 5945-00-019-7550
NSN 5996-00-169-9036
NSN 5930-01-621-8729
NSN 5910-00-755-0173
NSN 6320-01-143-3597
NSN 2925-01-036-8251
NSN 6610-01-192-6478
NSN 2925-00-684-7708