Furnished with a bright unplated finish
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 4140-01-209-6625
NSN 5996-00-658-8638
NSN 5935-01-507-7583
NSN 6620-00-527-6523
NSN 6110-00-014-6204
NSN 5990-01-378-7349
NSN 5920-01-433-2261
NSN 5915-01-612-9848
NSN 5930-00-388-0161
NSN 6145-01-068-1950
NSN 5950-01-093-0827
NSN 6610-00-186-9180