Plain finish
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5960-01-201-5804
NSN 5920-01-401-5315
NSN 6220-01-296-0860
NSN 6240-00-299-6468
NSN 5950-01-136-0847
NSN 6620-01-431-9176
NSN 5935-01-634-0668
NSN 5920-00-521-8331
NSN 6105-00-481-3401
NSN 6620-01-182-0099
NSN 5975-01-499-9458
NSN 5930-00-311-3064