A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5915-00-337-6698
NSN 6105-01-113-5045
NSN 5996-01-356-3791
NSN 5930-01-497-0928
NSN 5935-01-525-3210
NSN 5925-01-235-6499
NSN 5996-00-857-3077
NSN 5835-01-359-2575
NSN 5960-01-504-3415
NSN 5905-01-585-4273
NSN 2925-01-503-6792
NSN 5985-00-549-5973