No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5996-00-351-2369
NSN 6110-00-064-9340
NSN 5950-01-557-7304
NSN 5910-01-384-4899
NSN 2925-01-594-5385
NSN 5930-00-057-0398
NSN 5960-00-161-3728
NSN 6150-00-027-9279
NSN 5998-01-415-0965
NSN 6650-00-107-1667
NSN 6240-01-033-6941
NSN 5990-01-336-3976