F-16 acft; c/o 1 planet gear carrier, 3 plant gears, 54 roller needle bearing, 3 planet pins, 3 cap socket head screws, 7 thrust washers, 3 washers, 3 self locking nuts
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5985-01-368-7145
NSN 6610-01-066-2970
NSN 6150-00-100-1302
NSN 5965-00-263-6436
NSN 5905-01-109-9284
NSN 5975-01-429-8033
NSN 6645-00-171-9639
NSN 6105-00-126-2620
NSN 5985-00-818-1079
NSN 5920-00-396-8339
NSN 5960-01-623-3381
NSN 5985-00-617-3009