Divided by 0.1250 in. Saw cut into 2 equal halves
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 6145-00-166-7950
NSN 5835-00-632-8621
NSN 5915-01-592-3270
NSN 6130-01-535-4524
NSN 6220-01-443-2990
NSN 5905-01-454-2682
NSN 6320-01-084-8821
NSN 5915-01-100-0700
NSN 6610-01-027-8736
NSN 5996-01-437-8824
NSN 5910-01-620-3237
NSN 6150-01-463-3951