No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5925-00-424-9301
NSN 6145-01-391-6199
NSN 5960-01-023-8037
NSN 5960-01-096-6294
NSN 5998-01-299-3551
NSN 6650-01-260-1762
NSN 6135-01-386-5709
NSN 4140-00-052-4815
NSN 5935-01-103-4393
NSN 5950-01-385-9388
NSN 6150-00-227-6458
NSN 5950-00-205-1854