Four equally spaced 0.031 in. W flats opposite and parallel to each other, shim assembled by alternate indexing flats
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5905-01-042-8132
NSN 6105-00-949-3979
NSN 6150-01-232-4165
NSN 6145-01-235-0761
NSN 5910-01-371-3110
NSN 6150-01-062-7540
NSN 5996-01-106-2763
NSN 6110-01-099-4334
NSN 7035-00-679-9027
NSN 5985-01-652-1831
NSN 5996-00-557-8902
NSN 6240-00-099-8606