Four equally spaced 0.031 in. W flats opposite and parallel to each other, shim assembled by alternate indexing flats
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5855-01-177-4751
NSN 6320-00-682-3448
NSN 5960-00-365-6183
NSN 6320-00-994-0179
NSN 5930-00-542-2012
NSN 5985-00-189-0599
NSN 5915-01-005-0164
NSN 5998-01-457-0694
NSN 6135-00-983-9187
NSN 6105-01-381-0411
NSN 6105-00-036-5138
NSN 6620-00-955-6122