No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Zinc articles, nesoi
NSN 6220-00-981-9184
NSN 5910-01-317-6702
NSN 6135-01-604-3956
NSN 5835-00-647-2104
NSN 5950-01-594-3131
NSN 5996-00-452-2187
NSN 5999-01-268-8041
NSN 6130-00-119-3149
NSN 5835-01-509-8249
NSN 5999-01-056-2107
NSN 5985-01-459-0615
NSN 6110-00-682-7390