Part of load arm assembly; item very thick, large outside diameter
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6130-01-468-0353
NSN 6220-01-381-1074
NSN 5985-01-245-9064
NSN 5920-00-049-7835
NSN 5935-00-276-9413
NSN 6645-01-211-2111
NSN 5930-01-100-3635
NSN 6685-01-353-9083
NSN 5965-01-535-0718
NSN 5975-01-419-2061
NSN 5910-01-263-2836
NSN 6650-01-433-3520