A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of copper, nesoi
NSN 6685-01-062-5777
NSN 5935-01-133-1248
NSN 6610-01-649-5326
NSN 5895-01-304-8848
NSN 6105-00-924-9705
NSN 6240-01-149-8590
NSN 5985-01-473-9142
NSN 6650-00-226-7099
NSN 6105-01-147-0576
NSN 6110-01-146-4183
NSN 5920-01-170-3464
NSN 6610-01-426-5090