A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6650-00-937-5319
NSN 5960-00-512-9121
NSN 5996-01-444-3915
NSN 5985-01-200-1739
NSN 2925-00-845-1480
NSN 5915-01-113-7872
NSN 7035-00-079-7189
NSN 6135-00-789-2865
NSN 6240-00-410-5979
NSN 6130-00-266-7496
NSN 5950-01-186-0764
NSN 6105-00-887-3793