No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5975-01-527-2628
NSN 5960-00-777-4320
NSN 6645-00-239-5743
NSN 5920-01-528-9208
NSN 6110-00-893-9802
NSN 6145-00-836-8160
NSN 6645-01-216-8682
NSN 7035-01-314-7559
NSN 5965-00-926-2591
NSN 5920-01-227-1877
NSN 5910-00-954-4521
NSN 5950-01-423-8208