No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5855-01-221-4076
NSN 5930-01-194-2759
NSN 5998-01-141-7399
NSN 6105-00-964-4060
NSN 5835-01-291-3201
NSN 5920-00-558-6792
NSN 5975-01-117-3271
NSN 6685-01-094-7916
NSN 6620-01-514-7786
NSN 5990-01-081-3845
NSN 5945-01-552-0813
NSN 5895-01-321-9235