A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6135-00-125-5265
NSN 5975-00-286-8506
NSN 5985-01-134-2306
NSN 6145-01-502-1632
NSN 7035-00-727-4068
NSN 6145-00-228-2207
NSN 4140-01-546-0385
NSN 5950-01-077-6547
NSN 5920-01-443-3771
NSN 5990-00-296-4825
NSN 5985-01-436-6192
NSN 4140-01-226-9670