Divided by 0.1250 in. Saw cut into 2 equal halves
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 5835-01-565-3411
NSN 6150-01-163-8793
NSN 6135-01-359-4293
NSN 5920-00-679-7852
NSN 6130-01-123-9041
NSN 5855-00-997-6225
NSN 6320-01-103-6218
NSN 6105-01-200-8011
NSN 5985-01-492-7955
NSN 7035-01-265-2301
NSN 5965-01-209-2838
NSN 5945-00-219-6129