No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-01-526-4365
NSN 5999-00-968-6111
NSN 5965-01-590-3311
NSN 7035-01-421-4446
NSN 5996-01-181-5438
NSN 5945-01-042-2258
NSN 5996-01-588-0309
NSN 5999-01-588-1849
NSN 5975-01-273-7757
NSN 6150-00-855-6125
NSN 6320-01-113-7647
NSN 5975-00-781-6473