A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6105-01-359-9504
NSN 6130-01-521-1867
NSN 5930-00-278-7731
NSN 6645-01-492-5304
NSN 6105-01-513-9330
NSN 6110-01-415-3343
NSN 6220-00-712-1779
NSN 6645-00-405-1077
NSN 6645-00-076-3317
NSN 6135-01-521-0378
NSN 6145-01-178-6056
NSN 2925-00-169-3775