Material 18-8 stainless steel; finish plain; for screw size 10
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 6105-01-323-7679
NSN 5915-00-104-3119
NSN 5935-01-241-0629
NSN 5990-00-954-5059
NSN 6130-00-151-5001
NSN 5835-01-083-3741
NSN 6320-01-473-9024
NSN 7035-00-727-4068
NSN 5905-00-426-5957
NSN 5990-00-140-4559
NSN 6220-00-491-8929
NSN 5945-01-197-8631