No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5999-00-583-2661
NSN 6620-01-289-6627
NSN 6150-01-551-1266
NSN 6150-01-184-3233
NSN 6650-00-578-6543
NSN 5935-01-459-1254
NSN 5945-01-492-9907
NSN 5990-01-183-0765
NSN 7035-00-421-8710
NSN 5905-01-159-0085
NSN 7035-01-461-1066
NSN 5910-00-034-1853