No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 4140-00-817-6009
NSN 5910-00-868-3005
NSN 5915-01-374-1857
NSN 6135-00-284-1406
NSN 5925-01-316-6274
NSN 6610-01-389-3082
NSN 5985-01-421-5029
NSN 5965-01-008-5351
NSN 6135-01-543-3607
NSN 5925-01-453-1819
NSN 5945-00-213-0101
NSN 2925-01-182-9924