No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6150-00-158-5620
NSN 2925-00-839-6815
NSN 7035-00-371-7749
NSN 6110-00-826-9607
NSN 5990-01-408-6142
NSN 5985-01-034-0923
NSN 5895-01-490-3283
NSN 5835-01-115-6067
NSN 6105-01-433-2899
NSN 6135-01-084-1609
NSN 6105-00-296-0372
NSN 5985-01-199-4683