No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5999-00-165-2057
NSN 5998-00-603-9400
NSN 5996-01-068-4469
NSN 6645-01-297-9564
NSN 5990-00-400-4794
NSN 2925-00-336-8364
NSN 5965-00-543-1837
NSN 5895-01-342-3102
NSN 5835-00-740-0246
NSN 4140-01-257-1863
NSN 5905-01-597-9868
NSN 5855-01-020-7982