No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 6145-01-275-1214
NSN 6240-00-422-1278
NSN 5905-00-644-9983
NSN 5910-01-411-5366
NSN 5960-01-161-7240
NSN 6685-00-880-8753
NSN 5920-00-265-6222
NSN 5985-01-474-7110
NSN 6320-00-098-2858
NSN 5920-00-491-9163
NSN 6110-01-572-5216
NSN 5945-00-617-2866