No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Mica, worked and artcls nesoi
NSN 6320-01-170-4068
NSN 5985-00-466-3574
NSN 5965-00-549-0220
NSN 5855-01-234-5346
NSN 5999-01-023-7997
NSN 6135-01-497-2384
NSN 2925-01-647-7225
NSN 4140-01-483-0926
NSN 6150-01-300-2984
NSN 5855-01-400-1590
NSN 5915-01-204-4167
NSN 6620-01-198-4468