No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6145-00-239-2143
NSN 6610-00-172-7658
NSN 6610-00-138-0740
NSN 5960-00-133-2475
NSN 5930-00-227-3929
NSN 6620-00-877-3266
NSN 5975-00-315-3325
NSN 6650-01-590-7622
NSN 6110-01-174-9569
NSN 5950-01-123-8323
NSN 2925-00-404-6461
NSN 6610-00-113-4552