For use on dental chair; model e2000
No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 7035-01-155-0153
NSN 5930-01-084-6372
NSN 6130-01-367-7138
NSN 6145-00-144-0918
NSN 4140-00-654-9146
NSN 5835-01-507-0731
NSN 6110-01-004-9870
NSN 5965-00-092-8841
NSN 5945-01-496-8605
NSN 6620-01-015-2470
NSN 5960-01-339-0008
NSN 6145-01-184-0967