No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-01-012-3853
NSN 5950-01-604-8158
NSN 6110-01-442-5601
NSN 5975-00-775-6432
NSN 5999-01-240-7352
NSN 5990-01-489-0366
NSN 6130-01-644-8052
NSN 5950-01-486-5383
NSN 5920-01-331-4712
NSN 5915-01-537-8246
NSN 5920-01-631-3203
NSN 6650-01-261-5239