No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Articles of lead, nesoi
NSN 5925-00-369-7747
NSN 5905-01-470-8631
NSN 5975-01-551-1172
NSN 6610-01-393-8626
NSN 6135-00-763-5793
NSN 5965-01-122-7477
NSN 5925-00-803-5491
NSN 6145-00-174-1730
NSN 7035-01-349-4348
NSN 5950-01-429-1014
NSN 5920-01-192-7975
NSN 5996-01-046-1888