A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Austria 
Spain 
Singapore 
Kuwait 
Malaysia 
Australia 
Canada 
France 
Germany 
Republic of Korea 
Italy 
Denmark 
Greece 
Turkey Classification: Washers other than lock washers, iron or steel
NSN 5975-01-084-1043
NSN 5895-00-965-8983
NSN 5915-01-154-0723
NSN 5965-00-486-7907
NSN 5855-01-384-4914
NSN 6135-01-196-7399
NSN 6645-01-221-9424
NSN 6130-01-020-7307
NSN 6105-01-317-0342
NSN 6110-01-544-3375
NSN 5925-01-044-5508
NSN 5925-01-441-9512