No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-00-624-4134
NSN 6145-01-476-5451
NSN 4140-01-537-5052
NSN 6135-01-360-1620
NSN 6105-01-537-7347
NSN 6145-01-467-1797
NSN 6320-00-391-5906
NSN 6220-00-285-8104
NSN 5965-00-337-0777
NSN 6105-00-909-2146
NSN 6620-00-140-8644
NSN 7035-01-121-5905