A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-01-525-0101
NSN 5998-01-442-5463
NSN 6620-01-162-8001
NSN 5998-01-110-9935
NSN 5960-01-460-7620
NSN 5999-00-322-5887
NSN 5920-01-419-5271
NSN 5950-01-570-8677
NSN 5998-01-415-0267
NSN 6240-00-034-5909
NSN 5910-01-291-5500
NSN 5990-01-337-4584