A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other wrought titanium, nesoi
NSN 6105-01-272-9235
NSN 4140-01-579-5214
NSN 7035-00-679-9027
NSN 6320-01-506-9439
NSN 2925-01-443-1748
NSN 5960-01-411-5899
NSN 6110-00-399-1413
NSN 5998-01-442-7718
NSN 6150-01-421-4028
NSN 5998-01-498-3090
NSN 6685-01-605-3617
NSN 5835-00-949-3018