No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6220-01-540-8827
NSN 6150-00-438-7890
NSN 7035-01-396-3343
NSN 5935-01-329-9335
NSN 5945-01-634-0588
NSN 5910-00-052-4596
NSN 5990-00-917-2901
NSN 5950-01-097-5927
NSN 5999-00-052-6232
NSN 5905-01-383-7034
NSN 6650-01-557-7444
NSN 6240-01-425-1939