A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5915-01-152-8014
NSN 5915-01-372-8918
NSN 5925-01-471-5111
NSN 6610-01-352-6344
NSN 5920-01-336-7568
NSN 5920-01-263-2781
NSN 5910-01-411-6727
NSN 6110-01-047-1330
NSN 5895-01-025-0971
NSN 5960-01-013-9346
NSN 5960-01-310-3863
NSN 5950-01-512-9785