A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-025-6209
NSN 6145-00-033-2997
NSN 5985-00-221-5566
NSN 5910-01-069-5845
NSN 5985-01-323-4379
NSN 5990-01-443-2931
NSN 5910-01-361-3692
NSN 5950-01-643-6213
NSN 5999-01-519-9170
NSN 5915-00-256-2026
NSN 5920-01-286-2460
NSN 6130-00-932-9617