No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5960-00-939-8124
NSN 5895-01-519-2662
NSN 5915-00-281-0304
NSN 5960-01-294-2397
NSN 6150-00-941-5426
NSN 5895-01-442-7274
NSN 5925-01-460-4666
NSN 6135-01-322-4655
NSN 6145-01-581-8655
NSN 6220-00-324-7474
NSN 6645-01-040-8337
NSN 6105-01-029-7341