A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-00-189-1715
NSN 5945-00-174-6901
NSN 5965-00-285-0745
NSN 6220-01-044-0046
NSN 5905-01-097-7872
NSN 5915-01-472-3036
NSN 6150-00-467-5808
NSN 5930-00-710-4535
NSN 5999-01-446-9526
NSN 5910-01-314-6340
NSN 6645-01-580-9570
NSN 5998-00-392-0316