3 through holes equally spaced within 0.005 in. Of true position on bolt circle
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6240-00-248-6517
NSN 5999-01-527-7633
NSN 5910-00-240-4451
NSN 5925-00-999-1710
NSN 5985-00-961-6004
NSN 5905-01-354-6569
NSN 6145-01-632-1083
NSN 5905-01-646-4016
NSN 5915-01-626-6596
NSN 6320-00-403-6003
NSN 5960-00-592-4118
NSN 6610-01-398-1094