No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-01-023-8599
NSN 5920-01-645-0299
NSN 6220-01-556-2724
NSN 7035-01-026-1171
NSN 5835-01-624-5666
NSN 5945-00-438-3285
NSN 6650-01-327-3068
NSN 5910-01-186-6740
NSN 5990-00-844-1188
NSN 6110-00-627-7872
NSN 6610-00-421-9853
NSN 5985-01-610-8811