No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5935-01-280-4658
NSN 6110-00-510-8155
NSN 5835-01-045-6371
NSN 6105-00-516-2151
NSN 5920-01-495-2571
NSN 5935-01-605-9079
NSN 5855-00-797-8217
NSN 5975-01-656-2626
NSN 5998-00-001-2781
NSN 5996-00-452-2187
NSN 5996-01-612-1371
NSN 5999-01-109-0661