No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5855-01-339-1718
NSN 6110-00-660-8998
NSN 6610-01-138-8417
NSN 5925-01-102-2356
NSN 5985-01-488-4432
NSN 5930-00-789-4132
NSN 5996-00-578-9092
NSN 6145-00-736-8338
NSN 5835-01-367-4330
NSN 5965-00-577-1242
NSN 5950-00-727-1363
NSN 5945-01-348-7996