A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-01-045-3502
NSN 5895-00-073-2862
NSN 6650-00-269-5000
NSN 5996-01-158-9695
NSN 7035-00-541-8516
NSN 5930-01-558-5865
NSN 5905-00-845-9472
NSN 6105-00-312-4837
NSN 2925-01-026-1000
NSN 5999-01-352-7940
NSN 6135-01-238-2878
NSN 5915-01-524-4157