No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-01-163-0688
NSN 6240-01-466-3726
NSN 5910-00-080-0628
NSN 5990-00-443-2743
NSN 5920-01-494-4117
NSN 6620-01-647-1393
NSN 5855-01-487-5048
NSN 5935-01-328-2000
NSN 5905-01-517-7163
NSN 5998-01-476-7129
NSN 5910-00-556-9499
NSN 5965-01-087-5446